Thương hiệu
IGT Testing Systems
Sản xuất tại
Thông tin đang cập nhật ...
Ngôn ngữ
Tài liệu
Kích thước
Thông tin đang được cập nhật ...
Sản phẩm tương tự
Máy in thử Offset
IGT CT1x3: Printability tester to produce colour prints with conventional and UV offset inks. All C1 testers allow to print on cans with a diameter between 63 and 68 mm. The CT1x3 is especially designed to print three strips of 15 mm, besides each other, directly on cans and tubes with a diameter between 16 and 68 mm. This unit is equipped with an easy exchangeable impression cylinder to slide the tin or tube on. Also prints of 35 mm wide can be made on tins and cans. With the CT1x3 prints of 35 mm or 3×15 mm and regular prints on flat substrates can be produced as well.
Máy in thử Ống đồng
G1-5: printability tester for gravure prints. Dedicated tester to produce colour prints of conventional and UV gravure inks. Available with print width of 45 mm.
Máy in thử Flexo
IGT F1: Proofer for flexo inks. Can also be used for gravure prints.
The IGT F1 is a universal flexo proofer for use with solvent based inks, UV inks and water inks on a range of substrates. The F1 is available with facilities for printing on corrugated board and for gravure printing.
