✓ Excellent adhesion properties
✓ Fast cure
✓ Excellent printability
✓ Excellent chemical resistance

SUBSTRATES

Suitable for a wide range of coated papers, films and label stocks including:
✓ Coated PE, PP, PVC, PET, and OPP
✓ Shrink films, typically* PVC, PET, PET-G, OPS (EL221 & EL254)
* Due to the diverse nature of shrink films it is essential that each grade/application is tested thoroughly prior to commercial production

The suitability of uncoated synthetic substrates such as PP should be tested before printing. The surface tension should be 38 dyne/cm or above.
Corona treatment should be considered to improve the wetting and adhesion onto the substrate.

APPLICATION

Mix well before use.
Anilox Selection:
120-200 l/cm (300-500 lpi) volume 3-8 cm3/m²
Minimum lamp power – 160 W/cm
Fully cured UV flexo varnishes will obtain resistance properties 24 hours after printing. Foil blockable varnishes are not suitable for direct thermal overprinting. Please be aware that the over curing of a product may lead to problems with thermal transfer overprinting.
Clean equipment immediately after use.
These products are not intended for food packaging applications